EZRA FREECOASTER / CASSETTE HUB

[sixcol_five]
EZRA-freecoaster-hub-large

[toggle title_open=”FEATURES” title_closed=”VIEW FEATURES” hide=”no” border=”yes”]

logo-team-level-1 logo-ezra-fc-1 logo-sealed-rear-hub-1 logo-popnlock-compat-1[/toggle][toggle title_open=”HOW THE EZRA FREECOASTER WORKS” title_closed=”VIEW HOW THE EZRA FREECOASTER WORKS” hide=”yes” border=”yes”]

[/toggle]

[toggle title_open=”SPECS” title_closed=”VIEW SPECS” hide=”no” border=”yes”]
[twocol_one]

[button link=”https://blog.easternbikes.com/dealers/” size=”small” style=”none” color=”red” bg_color=”#000000″ border=”#000000″]WHERE TO BUY[/button] // MSRP $179.99

Our sister company EZRA developed this remarkable freecoaster hub. Capable of switching to a cassette hub in a few easy steps. It is also able to adjust the amount of slack, low, medium or high (high included with hub). Comes with a built-in groove in the shell to accept the Eastern Pop-n-Lock hubguard.

[/twocol_one] [twocol_one_last]

WEIGHT // 16 oz

COLORS //  Black,  Red,  Blue,  Purple,  Gold,  Chrome

NON DRIVE SIDE CONE NUT: CNCed 7075 T6 Alloy M14x1.0 thread
AXLE: 4130 Heat Treated Hollow Chromoly Precision CNCed axle. The axle is broached at each end to accept an 8mm hex key/allen wench to make disassembly easier. M14x1.0 threads
HUB BEARINGS: Precision sealed 6902RS2 sealed bearings. Some hubs use a smaller bearings but these prove to be one of the best lasting bearings
HUB SHELL: Forged then CNCed from 6061T6 alloy. 36H. Features a groove to accommodate the Eastern Pop-n-Lock hubguard.
RATCHET RING: Heat treated Chromoly. Just the right hardness to never wear out
CLUTCH SPRING: Custom Precision Made spring to allow just enough tension to get the pawls moving
CLUTCH DISC: Delrin Precision CNC clutch disc
CLUTCH DISC PILOT SPACER:  CNCed 6061 Alloy
BACKSIDE DRIVER BEARING: Precision sealed 6802RS bearing. Deep grooved to provide plenty of lateral strength.
PAWLS: Precision CNCed Pawls. 3 per hub. These are used in the cassette & the freecoaster mode
RETENTION SPRINGS(used in freecoaster mode): Precision Custom Made retention springs provide just enough down force to keep the pawls out of the way in freecoaster mode.
DRIVER: 9 Tooth 4130 Heat Treated Chromoly Driver Precision CNCed
DRIVER BEARING SPACER: CNCed Bearing spacer
FRONTSIDE DRIVER BEARINGS: Precision sealed 6802RS2 bearings. Deep grooved to provide plenty of lateral strength. 2 are used under the chain to add strength.
DRIVE SIDE CONE NUT: CNCed 7075T6 Alloy
EXPANSION SPRINGS: Expansion Springs are also custom made to push the pawls up with you use the hub as a cassette
[/twocol_one_last]

[/toggle]

[/sixcol_five]

[sixcol_one_last]


[/sixcol_one_last][hr]

Back to hubs[hr]

Leave a Reply

Your email address will not be published. Required fields are marked *

Follow @eastern_bikes

  • 40
  • 0
  • 137
  • 6
  • 190
  • 7
  • 80
  • 7
  • 43
  • 0
  • 131
  • 8